EXTREME Protective Film – Repair and Reinforcement Film for Hair Systems

EXTREME Protective Film – Repair and Reinforcement Film for Hair Systems

Repairs small holes and localised tears, reinforces fragile areas and protects PU/TPU hair system bases from wear.

Repairs small holes and localised tears.

Reinforces the most delicate areas of the membrane.

Protects the base from wear and contact with sebum.

Transparent, thin, single-sided adhesive film.

Applied inside the hair system, not to the skin.

Pack of 5 trimmable strips, 25 × 200 mm.

€15,90
€15,90 €15,90
Save 0% Sold out
Tax included. Shipping calculated at checkout.
  • Visa
  • Mastercard
  • PayPal
  • Apple Pay
  • Klarna
  • Google Pay
View full details

EXTREME / PROTECTIVE FILM

One film. Three solutions for your hair system.

A thin, transparent support applied to the inner side of the base. Explore its three uses.

Inner view of the hair system

Schematic inner view of a PU/TPU hair system. Transparent film is applied to the membrane; the controls let you explore repair, reinforcement and protection. PU/TPU baseTransparent film

The damage remains. The area gains support.

The film covers a small hole or localised tear and stabilises the surrounding membrane. The damage remains beneath the transparent layer: it is not erased.

Schematic illustration of the application principle, not a photograph of an actual repair.

For small, localised damage. Results depend on the condition of the base; a permanent repair is not guaranteed.

INTERNAL APPLICATION

Every layer has a role.

The silicone release paper and PE carrier are removed at different stages. The PU film stays on the hair system.

25 mm200 mm
One strip · 25 × 200 mm
Exploded schematic: PE handling carrier, PU film with its adhesive underside, removable white silicone release paper, and the hair system membrane to which the film is applied. 1 2 3 4 5
  1. 1

    PE carrier

    Remove after positioning.

  2. 2

    PU film

    The transparent layer that stays on the base.

  3. 3

    Adhesive side

    Faces the hair system membrane.

  4. 4

    White silicone release paper

    Peel away gradually during application.

  5. 5

    Hair system membrane

    The film adheres to the inner side.

  1. 01

    Turn the base towards you.

    Turn the hair system inside out to access its inner side and identify the area to cover.

  2. 02

    Expose a little adhesive at a time.

    Lift a small part of the white silicone release paper. Keep the PE carrier on the film to help you handle it.

  3. 03

    Apply while removing the paper.

    Place the adhesive side on the membrane and continue gradually, peeling away the white paper as you apply the film.

  4. 04

    Remove the PE carrier.

    Only once the film is fully applied, remove the PE carrier. The protective PU layer remains on the hair system.

Schematic cross-section: film is folded back at 180 degrees, parallel to the base, rather than being pulled upwards.180°

To remove: fold back at 180°.

Fold the film back over itself. Follow the surface of the base without pulling upwards, as instructed by the manufacturer.

Sequence based on the manufacturer’s instructions. Layer thicknesses are exaggerated in the diagrams to make each layer clear.

WHERE IT CAN HELP

Small interventions. In the right places.

Three localised situations on a PU/TPU membrane. The overall condition of the base remains important.

A small hole

The film covers the damaged spot and rests on the surrounding membrane.

A localised tear

A transparent layer supports the damaged area while leaving the underlying tear visible.

A weakened area

Preventive reinforcement supports a fragile part before damage spreads.

Illustrative diagrams, not photographs of completed repairs.

The product, in detail.

Product
EXTREME Protective Film
Material
Transparent, single-sided adhesive polyurethane film
Size
25 × 200 mm per strip
Pack
5 trimmable strips
Application
Inner side of a PU/TPU base
Functions
Protection, reinforcement and localised repair

Answers before you apply.

Can it repair a hole or tear?

Yes, for small, localised damage: the film covers and supports the affected area. It does not reconstruct missing material or guarantee a permanent repair. Severely deteriorated bases or extensive damage need assessment before intervention.

Which bases is it suitable for?

PU/TPU membranes, applied on the inner side. We do not extend this recommendation to lace or other unconfirmed materials. For hybrid bases, assess only the PU/TPU area, not the mesh sections.

Is it applied to the skin?

No. This film protects and reinforces the base and is applied inside the hair system. It is not a tape for direct attachment to the skin.

Which protective layer comes off first?

Remove the white silicone release paper progressively as you place the film onto the membrane. The PE carrier stays in place during this operation and is removed only when the film is fully applied.

How is the film removed from the hair system?

The manufacturer instructs you to fold it back over itself at 180°, without pulling upwards. Avoid lifting or putting tension on the thin membrane during removal.

What is in the pack?

Five transparent, single-sided adhesive strips measuring 25 × 200 mm, trimmable to fit the area to cover. The adhesive side is intended for the hair system membrane.

Unsure about your base?

Ask CrownHair for advice